iStick Pico Mega Mod

4,114.24

iStick Pico Mega

Product Introduction:
iStick Pico Mega, an upgraded version of iStick Pico, is compatible with both 26650 and 18650 cells. It is updated with the new firmware which features a simpler interface for VW mode, a Smart mode for easy operation and a custom logo for fun. The iStick Pico Mega also comes with many attractive colors for your choice.
iStick Pico Mega
iStick Pico Mega Kit
Parameter:
For iStick Pico Mega:
Size: 53.5mm*31.5mm*73.5mm
Thread type: 510 thread
Cell type: High-rate 18650 cell (Continuous discharge current should be above 25A)
Cell type High-rate 26650 cell (Continuous discharge current should be above 35A)
Output mode: Smart/VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-80W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (Smart/VW/Bypass mode)
Temperature range: 100-315℃/200-600℉ (TC modes)
Color: Hot pink, black, grey, silver, white
Features:
1. New Firmware V1.01: The new firmware features a simpler interface for VW mode, a Smart mode for easy operation and a custom logo for fun.
iStick Pico Mega Kit
2. Interchangeable 18650 or 26650 Cell: The iStick Pico Mega can be powered by a 26650 cell or a 18650 cell when inserted with the battery sleeve.
iStick Pico Mega Kit
3. Powerful Output and Various Modes Available:  It allows an intelligent and satisfying draw with 80W maximum output and switchable Smart/VW/Bypass/TC(Ni,Ti,SS,TCR) modes.
iStick Pico Mega Kit
4. Unique Bottom Design: The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well.
iStick Pico Mega Kit
5. 510 Spring Connector: It also retains stainless steel spring loaded 510 connector for strong wear resistance and high adaptability.
iStick Pico Mega Kit
Micro USB Port
Charging: The recommended way is to charge the 18650 or 26650 cell externally. The cell can also be charged in the iStick Pico Mega through the side USB port via 1A wall adapter or computer.
iStick Pico Mega Kit
Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
iStick Pico Mega Kit
iStick Pico Mega Kit
iStick Pico Mega Kit
iStick Pico Mega Kit
iStick Pico Mega Kit
Full kit comes with:
1×iStick Pico Mega (without cell) 1×Battery Sleeve
1×USB Cable 1×User Manual
Recommended Match: iStick Pico Mega & MELO III/MELO III Mini
The iStick Pico Mega is highly recommended to use with the MELO III or MELO III Mini atomizer. You will get an amazing vaping experience from this match

Out of stock

Compare
Category: